SWAT Mosquito Misting Systems creates a mosquito prevention
perimeter around your home by installing a custom-built
misting system. This system uses high-quality stainless steel
or nickel plated nozzles that are skillfully attached to your:
- Fence line
- Eaves
- Trees
- Wrought iron fences
- Concrete pillars
- Gutters
- Cyclone fences
The power and control portion of the system consists of a large
reservoir, a control unit and pump that are stationed in your
garage, shed or other outdoor area.
Generally, after initial installation, you set the mosquito
misting system to activate 3 - 4 times a day for anywhere from
20 - 45 seconds. You will notice a dramatic reduction in the
number of biting insects in your yard. As the number of insects
decreases, you may reset the system to mist just 2 - 3 times
per day for 30 - 60 seconds. If there are more bugs, you may
set the system to mist 4 times or more (SWAT Mosquito Systems
recommends not to mist more than 6 times per day). Increase
or decrease the number of sprays and the duration of the spray
according to the time of year and the number and concentration
of mosquitoes and insects.
Since many of the biting insects are active during the night,
we recommend misting during the evening and nighttime hours.
An average mosquito machine may go off late in the evening,
1 hour after sunset, 2 hours after sunset, and around sunrise.
You can, however, have the system go off during the day depending
on your mosquito prevention needs. For example, you could set
the system to go off an hour before you plan to have guests
in your backyard.
SWAT Mosquito Misting Systems can adjust the times and durations during
each service call or when we are out to fill the tank, or we
can teach you how to set the mosquito machine yourself.
It's also good to know that you can turn the system off completely
using the remote control or at the control panel.